PrimaSelect PLA Glossy

kr279.00

Nullstill
  Send meg epost når varen er på lager!
  Du vil få en epost når varen er tilgjengelig!

cancel?
  Send meg epost når varen er på lager!
  Du vil få en epost når varen er tilgjengelig!

cancel?
  Send meg epost når varen er på lager!
  Du vil få en epost når varen er tilgjengelig!

cancel?
Varenummer: I/A Kategori:

Beskrivelse

PrimaSELECT™ PLA is a very nice 3D Print material, it’s non-toxic and has a no unpleasant smell when you print with it. Because of its thermal characteristics it’s easy to get great prints. Filament from PrimaCreator comes on a transparent spool which makes it easy to see how much filament there are left on the spool.

PLA Glossy is a new type of PLA that is much stronger than regular PLA and has a heat resistance up to 75°C. This means that you can use it for mechanical parts, as well as parts that you can use in (for example) a hot car during summer without the risk of the print going soft.

PLA Glossy is a unique filament due to it’s shiny surface. It will produce prints with an extremely shiny/metal finish that really stands out.

PLA Glossy is used the same way as regular PLA but with a slightly higher temperature range.
The print temperature should be between 210 – 230°C (typical is 220°C). The filament should be used with a heated build plate for best results and depending on size of the print you, can use it with a range of 20 – 90°C (typical is 60°C) Use normal print speed 40-60 mm/s.

We recommend that you use PrimaFIX on you build surface for best adhesion and to avoid warping.

Tilleggsinformasjon

Vekt I/A
Size

1.75

Weight

750g

Colors

Ancient Gold, Antique Copper, Chopstic Red, Industrial Grey, Jungle Green, Liquid Silver, Nebula Purple, Polar White